4
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Installation:
Significant temperature deviations and changes in elevation or environment
can lead the glass panel of the smart signboard to trap a slight amount of
moisture. To avoid damaging the smart signboard, the condensation will re
-
quire at least 2 - 4 hours to evaporate prior to usage.
Important:
Operating the smart signboard with its back casing pressed down against a
flat surface (eg. table top) increases the risk of overheating the smart sign
-
board and decreases system performance.
Users are recommended to keep the back casing clear of direct casing-
against-flat-surface contact when operating the smart signboard to allow
proper air circulation and minimize overheating the system.
Installing the optional display stand
Mounting with VESA compatible mounting interface
This smart signboard accepts a MIS-D100 (100 mm x 100 mm) VESA-Compli
-
ant mounting interface and the recommended screw is M4 x 6 mm excluding
bracket thickness.
Arrange the smart signboard with the
screen pressed down against a clean
cloth, for cushioning, on a still and flat
surface.
1
→
→
→
→
flat surface
