IAdea PRB-101 Скачать руководство пользователя страница 5

Страница: 5 / 5

PRB-101 Swipe Card Reader Bracket

Quick Start Guide

Mounting Method 2 (attached breadthwise, either side)

Step 1: Place the WRP-1000 back
cover with the bracket at the

desired mounting location. Mark
the four mounting hole locations.

Step 2: Drill holes in the marked spots before securing the WRP-1000
back cover with appropriate screws.

Step 3: Secure the swipe card
reader to the bracket using two
M3 x 5 flat head screws.

Step 4: Remove the screws from the WRP-1000 and secure the bracket
to the WRP-1000 using the M2 x 8 pan head screw.

Step 5: Connect the magnetic

stripe card reader and Ethernet
cable to the WRP-1000.

Step 6: Place the WRP-1000 onto

the back cover.

Step 7: Tighten the right and left screws of the back cover to secure the

device.

Step 8: Tighten the top screw of

device.

Step 9: Conduct cable
management as necessary.

Step 10: Installation complete.

Note: PRB-101 mounting video link
Lengthwise:

https://youtu.be/2TAZPH2EZvA

Breadthwise:

https://youtu.be/L1OgwfR8y74

Содержание PRB-101





