i4Technology Grad 506, Руководство пользователя

Страница: 5 / 7

2.2.2 It is important to choose the right place for the Product installation if you would like to take control over
the rodents. Take into account the following:
- ultrasound waves bounce off hard materials and are absorbed by soft materials. Cloth, rags, furniture and so
on may reduce ultrasonic impact a lot, so be concerned that there must not be many such things in the place where
you would like to put the Product;
- ultrasound waves don’t pass through the walls or partitions. That is why when putting the Product in a house
you should concern that the Product can control the rodents in a stated area only when it is located in empty house
of a similar size. If the area is divided into several rooms or filled with shelves and partitions it would be needed
several appliances placed all over the area;
- installing the Product at the distance of 60-70 cm (1,97-2,30 ft) from the ground will bring to maximum effi-
cient operation. For putting a plug into a socket it is possible to use extensions cords. Do not use homemade or
defective extension cords – it may disable the Product and cause short circuit!
2.2.3 Rodents will disappear after 14 days of continuous Product operation in enclosed space.
3. Technical maintenance
3.1 Technical maintenance consists in cleaning the surface of the Product as needed.
3.2 Current repair. Types of malfunctions.
Typical malfunctions and possible solutions are specified in Table 2.
Table 2
Malfunction description Possible reasons Possible solution
When turning the Product ON the indi-
cator does not light
There is no supply-line
voltage
Check electric mains.
Product is defective
Return the Product to the repair
department.
4. Packaging, storage and transportation
Each Product is packed in individual package according to the supply package as indicated in Table 1.
Device moving in the package is not allowed. Parcels are placed into shipping containers – a corrugated fi-
berboard box.
Parcels can be transported by vehicle or railway in covered trucks or containers, by air in pressurized mod-
ules.
During transporting parcels should be protected from the effect of atmospheric conditions and solar emission.
Transportation conditions:
- ambient temperature: from -50 to 50

С (-58 to 122°F);
- relative humidity up to 95 % at 25

С (77°F);
- atmospheric pressure from 84 up to 107 кPа (from 630 up to 800 mmHg)
- peak impact acceleration is up to 147 m/s
2
(15g) at a duration of action of impact acceleration 10…15 ms.
The requirements on warning signs must be strictly obeyed when loading and transporting.
5. Acceptance certificate
Ultrasonic rodent repeller “Grad 506”