this action until you find the place with the maximum radiation.
4.3 Scan the detected place with maximum radiation for wireless «bugs», if you want, you can manually adjust
device sensitivity by sliding your finger up or down the touch panel.
4.4 If during scanning for a constant signal, all (or part) of the LEDs quickly turn on and off, please switch
operating mode to search of pulse signal.
4.5 In case of detection of a place with a maximum level of unknown radiation, the device can be switched into
feedback mode. If you hear a characteristic whistle out of the device, it means that a wireless microphone (bug) is
transmitting at the moment.
4.6 The "Guard" mode should be used when there is no unknown radiation around. It can take some (about 5
sec.) time for the device to automatically adjust the background radiation. After the adjustment process, the device
switches into “Guard” mode - "AK" indicator will light up for a short time period. If an unknown radiation is
detected, the device will alarm with a steady signal, when the radiation is over it returns to guard mode.
4.7 If necessary, recharge the built-in battery of the device via cable and AC adapter supplied. After charging is
over the red light will be off (item 10). In addition, the charging process is dynamically visualized with a backlight
of the touch-panel.
4.8. Some recommendations on device usage:
- Before starting the searching process, switch off any radio-emitting devices if possible (Wi-Fi, cell phone in
active mode, computers and other household and office equipment). It simplifies the process by eliminating extra
noise, and allows using higher level of sensitivity.
- In the "search" mode, the level of sensitivity of the device should be adjusted and you should go near the
suspicious object. It is desirable to scan with the help of the device places where most likely "eavesdropping"
devices could be installed.
- The most likely locations of eavesdropping and spying devices are: cavities and crevices in baseboards and
walls, behind radiators, remote places in the cabinets, moldings, ceiling cavity, ventilation shafts, pieces of
furniture, household items, flowers, board panel of the car, seat, etc.
- If the device detects a signal, it will alarm you with a sound and show it on the LED scale. The closer device
is to the transmitter, more glowing LED scale is.
- While scanning, it is preferably to use two different search modes: detection of usual analog wireless "bugs"
and digital ones.
- Usually, the "Guard" mode should be turned on if you need to have a constant control of the situation, for
example, during negotiations. The device keeps scanning the area in this mode. It will alarm you if any wireless
“bug” or hidden transmitting cell phone is disclosed.
- "Feedback" mode is used to search for hidden microphones (wireless "bugs"), operating in analog mode.
This allows the wireless "bug" to capture the sound emitted by the device, and broadcast it. The radio signal is
detected and its strength is increased by the device. As the result, the circle closes up and the device produces a
characteristic "whistle." “Feedback” mode is the most accurate method of "bugs" detection; it essentially reduces the
search time.
5. Package contents
Package contents of the device can be seen in Table 1.
Table 1
№
Item name
Quantity
Notes
1
Field indicator BugHunter™ Professional CR-
01 INTK.411153.005
1
2
microUSB cable
1
4
AC adapter
1
5
Packing box
1
6
User manual BA English Manual
1
Содержание BugHunter Professional CR-01
Страница 9: ......
