i3TOUCH V-SENSE V5503, Руководство пользователя

Страница: 5 / 22

5
i3TOUCH
V- SENSE V5503/V6503 T10 - operations manual
1. 1.2.11 Install the antenna far away from any high voltage cables.
» If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire
Caution
1. 1.2.12 Do not let the product drop while moving it.
» This may result in a problem with the product or injury.
1. 1.2.13 Do not place the product face down on the floor.
» This may damage the panel of the product.
1. 1.2.14 When installing the product on a console or shelf, make sure that the front of the product does not protrude out of the
console or shelf.
» Otherwise, this may cause the product to fall off and result in a malfunction or injury.
» Make sure to use a cabinet or shelf suitable to the size of the product.
1. 1.2.15 When putting the product down, handle it gently.
» Otherwise, it may result in a problem with the product or injury.
1. 1.2.16 If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may
occur due to the surrounding environment. In this case, install the product only after consulting one of our service
engineers about the matter.
» Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports or stations where
the product is continuously used.
1.1.3 Cleaning Related
Warning
1. 1.3.1 Before cleaning the product, unplug the power cord.
» Otherwise, it may result in electric shock or fire.
1. 1.3.2 When cleaning the product, do not spray water directly over the product parts.
» Make sure that water does not enter the product.
» Otherwise, it may result in fire, electric shock or a problem with the product.
Caution
1. 1.3.3 Avoid spraying cleansing agent directly onto the product.
» This may result in discoloration or cracking of the exterior of the product or the panel coming off.
1. 1.3.4 When cleaning the product, disconnect the power cord and clean the product with the supplide cleaning cloth.
» Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or cleansing
agent when cleaning the product, This may result in the exterior being deformed or the print being removed.
1. 1.3.5 If you can’t get the product clean with just the supplied cloth, use a soft, damp cloth with a “monitor-exclusive cleansing
agent” and wipe the product with it.
» If no moitor-exclusive cleansing agent is available, dilute a cleansing agent with water at a ratio of 1:10 before cleaning
the product.
1. 1.3.6 Since the exterior of the product is easily sdratched, be sure to use the supplied cleansing cloth.