14
www.i3-learning.com
Contact the
nearest service
center if the
projector
displays these
symptoms.
Warning Indicator
When the warning indicators (see below) come on,
the projector will automatically shutdown:
“LAMP” LED indicator is lit red and if “POWER/STANDBY”
indicator flashes amber.
“TEMP” LED indicator is lit red, this indicates the pro-
jector has overheated. Under normal conditions, the
projector can be switched back on.
“TEMP” LED indicator flashes red and if “POWER/STAND-
BY” indicator flashes amber.
Unplug the power cord from the projector, wait for 30 sec-
onds and try again. If the warning indicator light up again,
please contact your nearest service center for assistance.
Powering Off the Projector
1. Press the “ ” button on the remote control or
on the control panel to turn off the projector.
The following message will be displayed on the screen.
Press the “ ” button again to confirm otherwise the
message will disappear after 10 seconds. When you
press the “ ” button for the second time, the fan will
start cooling the system and will shut down.
2. The cooling fans continue to operate for about 4
seconds for cooling cycle and the POWER/STANDBY
LED will flash Orange. When the POWER/STANDBY LED
lights solid Orange, the projector has entered standby
mode.
If you wish to turn the projector back on, you must wait
until the projector has completed the cooling cycle and
has entered standby mode. Once in standby mode,
simply press “ ” button to restart the projector.
3. Disconnect the power cord from the electrical outlet
and the projector.
4. Do not turn on the projector immediately following a
power off procedure.
