Date and Time
– same as the Main Screen.
3.4.2. Searching Backup Video Recordings
Annexxus 301C/301C2M will record video onto the internal storage device depending on the Annexxus Video Recording
Schedule configurations, provided that the internal storage device is formatted and inserted into the Annexxus device.
Make sure that the video recording schedule is correctly configured. When recording based on sensor activity, make sure
the sensor is connected to the Annexxus device and is properly configured in the Sensor/Control setup tab. When recording
based on motion, make sure the Motion Detection areas and Motion Detection schedule are configured and in the Channels
setup tab.
To search the Annexxus internal storage device for the stored video recordings, do the following:
1.
Click the
Search
button to open the Search Window
2. Select the
Recording Type
from the drop-down menu.
This setting will filter stored video recordings based on the type of recording:
ALL
(to display all saved video files),
Continuous
,
Motion
(recorded based on Motion activity only),
Alarm
(recorded based on Sensor activity only),
Motion and Alarm
(recorded based on Motion and Alarm recording schedule; both motion and sensor activity must
be detected for the video recording to occur).
3. Configure the date and time in
Start Time
and
End Time
boxes. By default, the time search is set to search within
the current 24-hour period.
4. Click
Search
. If the internal video storage device contains the video file(s) that correspond the search criteria, the
list of saved video files will be displayed in the Search panel.
If the internal storage device contains no video files that match the search criteria, the following message will be
displayed: "Search has completed. No video files matching the settings have been found. Check recording schedule
settings or change the search settings and try again. Note that this Annexxus device may not support local video re-
cording."
When recording Continuously, Annexxus device will split the video recording into 128MB segments. Once the video
segment size reaches 128MB, a new file is created. Video recording from each video channel is saved into a separate
file.
When recording based on Motion, Alarm or Alarm activity, the a new video file will be created for each
motion and/or alarm event. Remember that the Pre- and Post-alarm Recording setting will affect the length of the
recorded video segment.
Scroll to see statistics for each stored video file:
File Name
,
Start Time
,
End Time
,
File Size
.
79
Searching Backup Video Recordings
Chapter 3. Remote Connection via Internet Explorer (Web
Browser)
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at