2.9. Sensor/Control Setup
In the Sensor/Control Setup, the authorized users perform the following tasks:
• Enable/disable Sensor input(s)
• Assign sensor type to the enabled sensor input(s)
• Configure schedule for enabled sensor input(s)
• Associate enabled sensor input(s) with connected control output(s)
• Associate enabled sensor input(s) with selected video channel(s)
• Associate enabled sensor input(s) with PTZ Preset, PTZ Preset Pattern or PTZ Auto Pattern (applies to Annexxus
301/304 units, where PTZ camera inputs are connected and properly configured in PTZ Setup tab).
• Configure schedule for connected control output(s)
• Configure default control output time
• Associate connected control output(s) with one or more system exceptions
2.9.1. Sensor Input(s) Setup
Annexxus 301-series support one (1) sensor input, while Annexxus 304 device supports up to four (4) sensor inputs. Each
sensor input can be configured to operate based on a schedule. Annexxus module can be configured to record video and/or
trigger control output(s) in response to sensor activity. When sensor is properly connected and configured in Annexxus
Advanced Setup, alarm logs will also be generated and stored by Annexxus module whenever sensor is triggered. In ad-
dition, each sensor input can be associated with a PTZ preset, PTZ Preset Pattern and/or Auto Pattern.
50
Sensor/Control Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at