![i3-TECHNOLOGIES i3CAMERA PRO Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/i3-technologies/i3camera-pro/i3camera-pro_user-manual_3165925002.webp)
6
Camera
Sensor
Scanning Mode
Progressive
Lens Mount
M12
Lens Focus
2.8mm
Wide Angle
120°
Distortion
0.46%
Auto Focus
Supported
Minimum Illumination
0.5 Lux @ (F1.8, AGC ON)
Shutter Speed
1/30s ~ 1/10000s
White Balance
Auto, Indoor, Outdoor, One Push,
Manual, VAR
Digital Noise Reduction
2D, 3D digital noise reduction
Backlight Compensation Supported
USB Features
Operating System
Windows, Linux, Mac OS
Video Compression
YUY2/MJPEG/H.264/NV12
Resolutions
-
YUY2
: 640x480 (default), 640x360
-
MJPEG
: 3840x2160 (default),
160x120, 176x144, 320x240, 352x288,
640x480, 720x576, 1600x896,
1280x720, 1024x768, 1024x576,
960x540, 848x480, 800x600, 800x448,
640x360, 480x272, 424x240, 320x180,
1920x1080
-
H.264
: 1920x1080 (default), 320x240,
352x288, 640x480, 720x576, 1600x896,
1280x720, 1024x768, 1024x576,
960x540, 848x480, 800x600, 800x448,
640x360, 480x270, 424x240, 320x180,
3840x2160
-
NV12
: 1920x1080 (default), 640x480,
1280x720, 640x360
USB Protocol
UVC 1.1
UVC PTZ
Supported (EPTZ)
Input/Output Interface
USB
1 x USB 3.0: Type B, female
Physical Properties
Input Voltage
5V (USB power supply)
Current Consumption
0.6A (Max)
Operating Temperature -10°C ~ 40°C
Storage Temperature
-40°C ~ 60°C
Power Consumption
3 Watt
Size
186mm x 47mm x 34mm
(without bracket)
MTBF
> 30.000 h
7
Maintenance and Troubleshooting
Camera Maintenance
- Use a soft cloth or cotton paper to remove dust from the
camera housing.
- When cleaning the camera lens, please use a dry soft cloth
to wipe. If the lens is seriously dirty, gently use a soft neutral
cleaner product that is not a corrosive detergent.
Avoid
- Filming particularly bright light sources (e.g. sun, lights, ...)
- Strong dynamic lighting conditions. The camera will have a
lot of work to keep adjusting the automatic compensation.
- Using the camera near high power radio waves.
Troubleshooting
The conferencing software does not use the i3CAMERA’s
camera, or microphone.
- Verify that the USB cable is properly connected to the PC.
- Verify that the PC’s operating system has properly detect-
ed and activated the camera in the device manager.
- Look for any camera settings in your conferencing
software. A laptop may initially prefer to use an integrated
webcam. Most software should have settings to select the
camera input source.
- Verify that the camera’s video output is not disabled, and
that the microphones are not muted. (see remote contol).
8
Type Approval and Compliance
EU Declaration of Conformity
Hereby we,
Manufacturer:
i3-TECHNOLOGIES N.V.
Address:
Nijverheidslaan 60, 8540, Deerlijk, BELGIUM
Declare that this Declaration of Conformity is issued under our sole responsi-
bility, and that this product:
Trademark: i3
Type designation: i3CAMERA PRO P1201
Type description: USB Webcam
Complies with the relevant Union harmonized legislations:
2014/30/EU: EMC – Electromagnetic Compatibility Directive
2014/35/EU LVD – Low Voltage Directive
2011/65/EU RoHS – Restriction of Hazardous Substances
Hereby we,
Manufacturer:
i3-TECHNOLOGIES N.V.
Address:
Nijverheidslaan 60, 8540, Deerlijk, BELGIUM
-
bility, and that this product:
Trademark: i3
Type designation: i3CAMERA PRO P1201
Type description: USB Webcam
Has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television recep-
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.