Rev. 230504
Thank you for purchasing i3 International’s M71 Edge Ai dome camera.
M71 is equipped with a motorized 2.8-12mm @ F1.4 lens.
This camera is compatible with the optional back box (Part#: B71).
M71 camera’s versatile Edge Ai functionality can be utilized by a variety of i3’s
solution, including i3’s i3Ai software, SRX-Pro Server and as part of the i3’s Velocity
Timer Solution (VTS).
Note:
h.265 codec is supported by SRX-Pro v7 and above only. For backwards
compatibility, change the codec to h.264 in the camera’s web settings > Config >
Image > Video/Audio > Video Compression.
SAFETY
When installing your M71 camera be sure to avoid:
• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light and unstable light sources
• temperatures below -30° C (-22° F) and above 55° C (131° F
).
To avoid electrical shock and to preserve the product warranty,
DO NOT
disassemble the camera. Refer servicing to qualified personnel only.
POWER SUPPLY
This camera accepts PoE and DC12V power.
Ensure the supplied voltage meets the power consumption requirements of
this camera (9W) before powering the camera on. Incorrect voltage may cause
irreparable damage to the video camera and will effectively void the camera
warranty.
CLEANING
• For maximum optical clarity, the camera dome or lens must remain clean.
Use a soft, dry cloth to remove finger prints or dust from the dome cover.
• Use a blower to remove dust from the lens.
• Do not use volatile solvents such as alcohol, benzene, or thinners,
as they may damage the surface finishes.
PACKAGE CONTENTS
Ensure that the items received match
those listed on the order form and
the packing slip. In addition to this
manual and a fully assembled camera,
the dome camera packing box includes:
A.
Standard RJ45 connector (x2)
B.
Surface mount template (x1)
C.
Torx bit (x1)
D.
Plastic anchors (x4)
E.
Round head screws, tapping type (x4)
F.
BNC test monitor input & DC IN power cable (x1)
CAMERA PARTS AND DIMENSIONS
C
A
5MP H.265 Edge Ai Dome Camera
M71
User Manual
i3-TRNG-CAMS-
M71
.indd
7
1.
RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.
Insert an Ethernet cable into the port for network connection as well as PoE
(Power over Ethernet) power. Use the included waterproof RJ45 connector assembly
to maintain the camera warranty and the water-resistant rating.
2.
BNC video output connector for public view monitor (PVM) output (CVBS).
3.
Screws securing the dome bubble housing to camera module (x4, silver, Torx)
4.
IR board
5.
Light sensor (do not block or obstruct)
6.
Lock screw. Loosen to separate the camera’s mounting base.
7.
Reset pinhole. Press for 10 seconds to restore camera settings to factory defaults.
8.
CVBS hand-help monitor/DC IN connection port. Use to power the camera and/or
fine-tune the camera view during the installation.
9.
Zoom Out (
W
ide), lens adjustment button. Motorized lens can be adjusted remotely
through Video Pilot Client (VPC).
10.
Zoom In (
T
ele), lens adjustment button. Motorized lens can be adjusted remotely
through Video Pilot Client (VPC).
11.
MicroSD Card slot for on-camera video storage (up to 256GB supported, sold
separately).
3-AXIS LENS POSITIONING
Figure 3. M71, Parts and Dimensions
Figure 1. M71, Accessories
WATERPROOF RJ45 ASSEMBLY
To prevent the corrosion of the RJ45 connector and to maintain the camera
warranty, use the RJ45 waterproof assembly attached to the camera, as shown in
the diagram below.
1
2
3
1.
Twist off the RJ45 waterproof
assembly from the RJ45
connector.
2.
Feed the CAT5e/6 cable through
the opening in the connector and
crimp it using the standard RJ45
connector provided.
3.
Plug the crimped CAT5e/6 cable
into the RJ45 connector on the
camera and twist the waterproof
assembly on to re-attach it.
Figure 2. Waterproof RJ45 connector
Figure 4. M71, 3-axis lens positioning diagram.
NOT IN USE
AL
ARM
4 3
2 1
B
D
E
F
8
9
10
4
1
/
2
”
(114.2 mm)
5
15
/
16
” (150.4 mm)
2
1
/
2
” (63.8 mm)
6
5
11
4
3
Tilt
Rotate
3-axis Range
Limitations:
Pan range: 345°
Rotate range: 345°
Tilt range: 77°
Important:
Do not over-rotate the camera lens assembly beyond the stop point to
prevent twisted, disconnected, or broken internal cables/components.
Pan
Grip and rotate
1
2
