background image

1

 PRECAUTIONS 

This equipment has been tested and found to comply with the limits 

for a Class A digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with 

the instruction manual, may cause harmful interference to radio 

communications.

Operation of this equipment in a residential area is likely to cause 

harmful interference, in which case users will be required to correct the 

interference at their own expense.

FCC Caution:

To ensure continued compliance, use only shielded interface cables 

when connecting to computer or peripheral devices. Any changes 

or modifications not expressly approved by the party responsible for 

compliance could void the user’s authority to operate this equipment.

The serial number of this product may be found on top of the unit. It is 

recommended that you note the serial number of this unit in the space 

provided and retain this book as a permanent record of your purchase to 

aid identification in the event of theft.

Model No.                                              

Serial No.                                               

Date of Purchase:                                  

Содержание i3F416U























Отзывы: