i3-TRNG-CAMS-
Ax63C-QuickGuide
.indd
Rev. 170524
Quick Start Guide
3MP Day/Night Auto Back Focus Box IP Camera
Ax63C
CAMERA PARTS AND DEFINITIONS
72 mm (2.8”)
62 mm (2.44”)
145 mm (5.7”)
1
2
3
4
5
6
7
8
9
10
11
12
DC12V
AC24V
AUDIO
ALARM
RS485
IN
OUT
GND GND
GND GND
COM1 COM2
IN2
IN1
OUT1 OUT2
ETHERNET
POWER
RESET/
DEFAULT
MINI USB
ABF
1.
CS Mount.
Remove the protective CMOS cover and attach compatible CS-mount lens (sold separately) or a C-mount lens with a spacer.
Compatible i3 lenses:
•
D-YV2.8X2.8SR4A-SA2L - 3 Megapixel Lens, f:2.8-8mm, F1.3
•
D-YV3.3X15SR4A-SA2L - 3 Megapixel Lens, f:15-50mm, F1.5
2.
DC (Auto) Iris Control Port.
Connect lens’ iris control cable for automatic iris control.
3.
Mounting Thread Hole.
Connect to a compatible i3 mounting bracket.
•
i3-6801HB - IP67, Vandal-proof di-cast aluminum housing with mounting bracket.
•
i3-6801HBR - IP67, Vandal-proof di-cast aluminum housing with IR illuminators and mounting bracket
4.
I/O Connector.
Connect external devices, e.g. sensor inputs (Alarm IN1, IN2),
control outputs (Alarm OUT1, OUT2), i3-recommended microphone (Audio IN/OUT)
5.
Micro SD card slot.
Insert a microSDHC/SDXC card into the slot for edge video recording and storage. Card sold separately.
6.
ABF Pin-hole button.
(Automatic Back Focus). After mounting the camera and positioning it for the perfect shot, using a pointed object, press and
hold the ABF button for
2 seconds
to automatically calibrate camera’s back focus to achieve accurate focus.
7. Mini USB Port (reserved for factory use)
8.
DC 12V/AC 24V:
Power Terminal.
(
If using PoE power from your switch, do not use this connector). Connect the power terminals to a power supply.
If using DC 12V power supply, make sure to connect the power connector to correct ports (Red+/White–).
9.
Green LED / Orange LED.
Solid green LED indicates a live network connection. Flashing orange LED indicates data being transmitted and received.
10.
ETHERNET/PoE port.
Connect the network cable to the network switch.
11.
Power LED.
Solid red LED indicates that the camera is powered ON.
12.
RESET/DEFAULT.
Using a pointed object, press and hold the RESET/DEFAULT button for
1 second
to reboot the camera or continue holding for
6
seconds
to restore camera’s settings to factory defaults.
SAFETY
When installing your Ax63C camera be sure to avoid:
•
excessive heat, such as direct sunlight or heating appliances
•
contaminants such as dust and smoke
•
strong magnetic fields
•
moisture and humidity
•
areas with mechanical vibrations
•
fluorescent lamps, objects that reflect light,unstable light sources
•
temperatures below -10° C (14° F) and above 50° C (122° F).
To avoid electrical shock and to preserve the product warranty, DO NOT
disassemble the camera. Refer servicing to qualified personnel only.
POWER SUPPLY
Ensure the supplied voltage meets the power consumption requirements of this
camera before powering the camera on. Incorrect voltage may cause irreparable
damage to the video camera and will effectively void the camera warranty.
Ax63C camera accepts: DC12V, AC24V and PoE IEEE 802.3af, class 3 compliant.
CLEANING
•
For maximum optical clarity, the camera lens must remain clean.
•
Use a blower to remove dust from the lens.
•
Clean the body with a soft, dry cloth. If it is very dirty, use a cloth
dampened with a small quantity of neutral detergent, then wipe dry.
Do not use volatile solvents such as alcohol, benzene, or thinners, as they may
damage the surface finishes.
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the
packing slip. In addition to this manual, the camera packing box includes:
•
Fixed Box Network Camera w/ CMOS cover x1
•
3 ft network cable x1
•
Standard RJ45 Connector x2
x2
x1
i3-6801HB
i3-6801HBR
