CAMERA PARTS AND DEFINITIONS
Quick Start Guide
1.3/3MP Infrared Outdoor IP Dome Camera w/ Motorized Lens
Ax45RM/Ax65RM
SAFETY
When installing your Ax45RM/Ax65RM camera be sure to avoid:
•
excessive heat, such as direct sunlight or heating appliances
•
contaminants such as dust and smoke
•
strong magnetic fields
•
moisture and humidity
•
areas with mechanical vibrations
•
fluorescent lamps or objects that reflect light and unstable light sources
•
temperatures below -50° C or -58° F and above 50° C or 122° F
.
•
For more details on installation / operation, please refer to the CD provided.
POWER SUPPLY
Ensure the supplied voltage meets the power consumption requirements of this camera
before powering the camera on. Incorrect voltage may cause irreparable damage to the
video camera and will effectively void the camera warranty.
CLEANING
•
For maximum optical clarity, the camera dome or lens must remain clean. Use a soft,
dry cloth to remove finger prints or dust from the dome cover.
•
Use a blower to remove dust from the lens.
•
Do not use volatile solvents such as alcohol, benzene, or thinners, as they may dam-
age the surface finishes.
SERVICING
To avoid electrical shock and to preserve the product warranty, DO NOT disasemble the
camera. Refer servicing to qualified personnel only.
PACKAGE CONTENTS
Ensure that the items received match those listed on the order form and the packing slip.
In addition to this manual and a fully assembled camera, the dome camera packing box
includes:
1. User Manual and Annexxus Configuration Tool CD x1
2. Surface Mount template x1
3. Rubber gasket x1. Use in all outdoor installations.
4. Security torx bit x1
5. Flush Mount template x1
6. Round Head Screw (Tapping Type) with O-ring x4
7. Plastic Anchor x4
8. Long Screws for Flush Mount w/Back Box installations x3
9. Standard RJ45 Connector x2
10. 8-pin green terminal block x1
i3-TRNG-CAMS-
Ax45RM-65RM-QuickGuide
.indd
Rev.
151126
1
3
5
9
6
7
User Guide
IP Finder
8
2
Lens Direction
GUIDE PATTERN
GUIDE PATTERN
CAMERA OUTLINE
CUT LINE
O-ring
4
10
12
13
14
1. Camera’s back box
2. Screws attaching camera module to the
back box
(x3, silver)
3. Camera module / second housing
4. Tilt bracket with locking screws
5. Inner liner / Shroud
6. IR board
7. Dome bubble housing / Dome cover
8. Screws securing the dome bubble housing to camera module (x3, silver)
9. Lexan bubble
10. 3/4” Top conduit hole. During installation, sealant must be used to maintain the
IP66 status.
11. 3/4” Side conduit hole. During installation, sealant must be used to maintain the
IP66 status.
12. Reset/Default pin-hole button. Press for 1 second to reboot the camera. Press for
6 seconds to restore camera settings to factory defaults.
13. Micro SD Card slot for on-camera video storage. (microSD card sold separately)
14. Mini USB port. Use mini USB to RJ-45 adaptor for real-live video preview during
installation to adjust camera’s field-of-view.
