I Want DIY Audio LITE CD-22, Руководство пользователя

Страница: 6 / 9

USING THE CONTROLS
Please refer to the top & front panel view .
LOADING A DISC
Place the disc on the spindle. Then place the CD-clamp on the spindle . The clamp now securely
fastens the disc.
When a disc has been loaded, your CD-22 CD Player will briefly spin the disc
while it studies the data encoded on it in few seconds .The disc will then stop and the display
will indicate the number of tracks on the disc and the total play time.
To commence playing a disc, press Play Button (2) once. The disc will play from the beginning.
Press the Pause button (3) to pause the disc whilst it is playing. Pressing the Play Button (2)
again will resume playback from the point at which Pause mode was entered. In Pause mode,
the disc continues spinning and the laser will still be operational but locked. Please keep the
CD player in Pause mode no longer than strictly necessary.
Warped discs should never be played.
If a disc is not inserted or if the disc is damaged or inserted upside down, the CD player
will remain inoperative (Display will indicate: no disc).
SELECTING A TRACK
Press the Track Forward Button (5) to go to the next track on the disc. Pressing the Track Back
Button (4) will take you to the previous track.
***** When the disc is playing, press the Track Back Button once to take you to the beginning
of the current track and a second time to take you to the start of the previous track. In Play
mode press the Track Forward Button (5) to take you forward to the start of the next track.
Once the procedure is complete the disc will commence playing from the selected track. When
a disc is first loaded, you can use these buttons to select your desired track. Having done so,
press the Play Button and your disc will commence playing from the selected track. You may
select a track when Pause is engaged. In this case, the disc will revert to Pause after the
procedure is complete and you will have to press Play Button to continue playing the disc.
REMOTE CONTROL
Your CD player is supplied with a Remote Handset.
The Remote Control Handset is powered by two 1.5V AAA batteries.
When inserting the batteries observe the correct polarity.