I-View EPOC-131VAJ, Руководство по установке

Страница: 2 / 5

2

Product Application Diagram
The Ethernet over UTP Cable system allows the Star topology or Daisy-chained communication. It supports
virtually any type of Cat. UTP wire, including such as Cat.5, 5e, 6, or 7 cable. And different wire types can be
concatenated together, as needed.
To avoid the interference signal, we strongly recommend using the Cat. STP cable with metal RJ45
Connector for Ethernet/PoE signal transmission when there are more 16 pcs EPOC-131VAJ install at the
same Hub site.
Daisy Chain
Point to Point Topology
The IP camera and EPOC-131PSJ cannot receive power through the UTP cable. Please do as below:
1.
POE+ Hub or plug DC56V power adapter for EPOC-131VAJ.
2. Plug the DC48V power adapter into the EPOC-131PSJ will be needed at this end. Please refer to “
Power
Wattage VS. Cable Distance
” table or visit www.i-view.com.tw
Plug DC56V power adapter to EPOC-131VAJ or DC48V to EPOC-131PSJ when the IP Camera cannot receive
Plug DC48V power adapter to EPOC-131PSJ when the EPOC-131PSJ cannot receive power.