5
Network Deployment
General Connection (without PoE)
1. Connect RJ45 Ethernet cable to a switch. Use a Category 5 Cross Cable when your network
camera is directly connected to PC.
2. Connect the power cable from the Network Camera to a power outlet.
Power over Ethernet (PoE)
The Network Camera is PoE-compliant, allowing transmission of power and data via a single Ethernet
cable. Follow the above illustration to connect the Network Camera to a PoE-enabled switch
via
Ethernet cable.
1. Align the front cover and with
tri-angle symbol, and then move the
ring with clockwise direction to fix to
front cover.
2. Replace the sunshield
