I-View Now easynet ed-p series, Руководство по установке

Страница: 5 / 15

© 2013 I-View Now, LLC. All Rights Reserved.
Nuvico EasyNet ED-P Series Installation Guide rev 1.0 Page 5
Network Setup
After logging into the device for the first time, the first setting that should be changed is the IP address. The DVR
requires a static internal IP address because one or more communication ports will have to be forwarded to it from the
firewall or router on site.

Click the setup Menu Icon

Select the Advanced Setup Tab

Click Network
The following network setting information should typically
be obtained from the site’s IT staff. Any DNS server that can
resolve ivnview.com may be used, but 8.8.8.8 and 8.8.4.4
are google’s public DNS servers. Use them if the location’s IT
staff does not have a preferred DNS server.

Ensure DHCP is not checked

Enter The Static IP address for the DVR

Enter the subnet Mask

Enter the default Gateway

Enter 8.8.8.8 for DNS1

Enter 8.8.4.4 for DNS2

If port 7000 is already in use, another port may
be assigned here. If available, default port 7000
may be used

Click Save to finalize settings
The Setup Menu is located at the Top right hand corner of the screen. It is not displayed
until being moused over.
Setup Menu->Advanced tab->Network Menu
Setup Menu->Advanced tab->Network Menu->Network