Using GPS Data Logger
Configuration
Connection Setting
This is to establish a connection between the computer and GPS receiver. Please make
sure USB cable is connected to your computer.
•
The program can auto-detect available com port by using
Scan
function.
•
Or you can go to Windows device manager and note the corresponding virtual
COM port.
(Check
virtual com port number of GPS data logger)
•
Select correct com port. (COM7 used in this example) and set Baud Rate at
115200
.
•
Click on
Connect
to establish a connection. GPS status in the
SATELLITE
INFORMATION
section will start to show when you click on it.
•
To stop connection, please click on
Disconnect
.
Output Period
This is to set NMEA output for the Bluetooth interface in the NAV mode.
•
Check the NMEA type -> Choose output period -> Set
•
For selecting NMEA data output (RMC, GSV, GSA, GGA are compulsory data, user
are not allowed to DE-SELECT)
•
NMEA setting here will only affect the NMEA sentences for navigation usage. This
has nothing to do with logger’s data recording.
•
Period (s): For example, GLL (4) stands for GLL sentence update every 4 seconds.
