I-Tech LaMagneto Pro, Руководство пользователя

Страница: 22 / 44

I.A.C.E.R. Srl 22 MNPG263-01
e) Use the and buttons to set the hertz (frequency) of the
treatment and confirm by pressing the OK button.
7. The device will return to the screen in point 6. Press OK: the device
will start the treatment, displaying the magnet icon with the magnetic
field flux. The green light tells you the therapy is underway.
At the end of the therapy, the device will automatically return to the
program menu screen.
Instructions for using programs in Double Patient mode
To use the "Double Patient" mode of the LaMagneto Pro device, follow
these simple steps:
1. Connect the applicator (or applicators) to the device by connecting
the plug of the applicator cable to one of the two ports (CH1-CH2)
on the panel at the top of the appliance;
2. Connect the mains cable to the power supply and then connect the
power supply outlet to the circular connector on the panel at the top
of the device, near the ON/OFF switch;
3. Connect the plug of the mains cable to the mains socket (110-
230VAC, 50-60 Hz);
4. Press the ON/OFF switch on the small panel in the upper part so it
is in the ON position: the display will show the I-TECH MEDICAL
DIVISION logo and then the main menu screen;
5. Select "Double Patient" by pressing the button and press OK;
6. Scroll through the programs using the buttons and and
select the desired program;