Pairing Your Headset with a Bluetooth Mobile Phone
If the pairing cannot be completed within three minutes after the pairing
mode has been activated, the headset’s status indicator will stay green three
seconds and then turns to standby mode. Repeat steps 1 to 3 to pair the
devices again.
When you turn on your headset for the first time, the headset proceeds
into pairing mode, i.e. the status indicator blinks green, so that you can
immediately pair it with your mobile phone.
Using Your Headset
Function Button Audio
Status Indicator
Power ON Press and hold the MFB a short beep Flash green light 3 times
Using Your Headset
Function Button Audio
Status Indicator
Power OFF
Press and hold the MFB for 2
seconds
Ringtone on
earphone
Press the MFB once
Press the Volume Key once to
increase/decrease by 1 step
(Total 6 level)
Incoming call
End a call
Adjust Volume
Voice Dialing*
Press the MFB once
Green light for two seconds
and then the light goes off
Quick flashing green light
Flashing green light
Press the MFB once
Answer a call
Flashing green light
Flashing green light
Flashing green light
a long beep
a short beep
Say the voice tag as soon as you hear the short beep and you must have
recorded the voice tag into your mobile phone.
Using Your Headset (cont'd)
Function Button Audio
Status Indicator
Last no. Redial* Double click the MFB
Press and hold the Volume
Key for 2 seconds
While speaking, press and
hold the volume Key for 2
seconds
While speaking, press MFB
once
Reject a call*
Call Transfer
(headset to
mobile phone)*
Call Transfer
(mobile phone
to headset)*
Flashing green light
Flashing green light
Flashing green light
Flashing green light
* Subject to mobile support
a short beep
Factory Reset
You may reset the headset to its default settings. Resetting will also remove
the pairing history of your headset with the mobile phone.
1. Hold the volume key and plug charging cable into the charging socket for
approximately 10sec. The earpiece will beep 2 times.
2. Release the volume key.
3. The headset is reset.
i.Tech Bluetooth headset is designed to work with Bluetooth devices. Due to
large variability between different Bluetooth devices from different
manufacturers, interoperability between the headset and all
Bluetooth-enabled products is not guaranteed.
9
10
11
12
