I-Tech DA001, Операция

Страница: 11 / 19

Trouble Shooting
If your monitor fails to operate correctly, consult the following chart for
possible solution before calling for repairs/RMA.
Condition Possible Solution
The screen is not synchronized? 1.
Check if the signal cable is
firmly seated in the socket.
2.
Check if the output level matches the input
level of your computer.
3.
Make sure the signal timings of
the computer system are within the
specification of the monitor.
4.
If your computer was working with a CRT
monitor, you should check the current signal
timing and turn off your computer before you
connect the VGA Cable to this monitor.
The Picture does not appear? 5.
Make sure the power cord is
plugged into the power outlet and into the
back of the monitor.
6.
Check if the signal cable is
firmly seated in the socket.
7.
Check if the Power is ON at the computer
8.
Check if the brightness control is at the
appropriate position, not at the minimum.
The position of the screen is not in
the
center?
9. Press the Auto button. Adjust
the image position using the Horizontal
Position and/or Vertical Position in OSD Main
Controls.
The screen is too bright/dark.
10. Check if the brightness or
contrast control is at the appropriate position,
not at the Maximum/Minimum.