www.tuv.com
Test Report No.: 14008928 001
Appendix 4
page 18 of 27
Page 8
Pairing Your Earphone
1. Place the Earphone and the device where they are easily viewable by no more than 1 meter apart.
2. Ensure the earphone is OFF.
3. Press and hold the
MFB
until the earphone
LED
alternately flashes blue and red.
4. Activate your mobile handset’s Bluetooth function by referring to your mobile handset user guide for details.
5. Set the device to search for Bluetooth devices within about 1 meter as instructed in the mobile handset user
guide and select “i.Tech BlueBAND” from the list.
6. Enter the preprogrammed passkey “8888” and press “OK” to pair your earphone and device. When the
pairing is complete, the headset
LED
will flash blue rapidly for 5 times followed by a long beep.
7. Go back to your device’s main menu. For certain device models, a headset / audio icon will be shown on the
screen. You should now be able to make and receive calls using your earphone and listen stereo music via
your earphone.
IMPORTANT If the pairing cannot be completed within 2 minutes while the pairing mode is activated, the
headset LED flashes purple red with 3 beeps and the headset is turned off. Please repeat Steps 2 to 7 to
pair the headset and the mobile handset again.