10
Quick Start / USB-C HUB 3 Port + Gigabit Ethernet Adapter
EN
• In the Network adapters group, an item named „Realtek USB GBE
Family Controller“.
To verify the driver of the adapter, follow the steps below to open the
Device Manager on mac
®
• Please connect the USB to LAN device to macBook / PC.
• Click the System Preferences
→
Network
→
USB Gigabit Ethernet
device active on line.
Note: If there is a (question) or (exclamation) mark next to that
item, then the driver is not properly installed. Please delete the item,
unplug the adapter and repeat the installation steps.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
•
Use the device on flat surfaces – you will prevent it from slipping
and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the
user manual.
FAQ
available on our website
www.i-tec.cz/en/
on the „FAQ“ tab of this
product.
