i-tec SOLAR AdVANced fuNctiON:
A: MuLtiPOiNt
i-tec SOLAR - Bluetooth MULTIPOINT Handsfree CarKit may be paired with up to 8 telephones equipped with the technology Bluetooth, but
it works with only 2 last paired MT (if the Multipoint function is ON).
Multipoint ON/Off
Multipoint mode is default switched off.
Multipoint ON:
Under Standby mode, press and hold VOL+ (2) button for 3s until you hear a beep.
Multipoint OFF:
Under Standby mode press and hold VOL- (7) button for 3s until you hear a beep.
Pairing with two phones (Mt):
1. Handsfree CarKit is OFF and Multipoint mode is ON.
2. Press and hold MFT (5) button for 6s and pair with the first phone
3. Turn OFF CarKit. Then press and hold MFT (5) button for 6s and pair with the second phone
4. Power OFF the CarKit again; then turn ON and CarKit will automatically connect with last 2 paired phones.
uSiNG MuLtiPOiNt MOde
Answer a call
Incomming call for one phone:
1. Answer a call – Press MFT (5) button once .
2. Ending a call - Press MFT (5) button once .
3. If there is a second call from other phone during conversation (advice note is only on some types of phones), you have to answer the
call on second phone
Note: Some types of phones support this function: If you end the call with the first phone before finishing of ringing, then CarKit
automatically switch on the second pnone and you are able to answer a call by press MFT (5) button once
Voice dialing
For the 1st MT: Briefly press VOL+ (2) button and say the name of person you wish to call. CarKit repeat the name and start dialing.
For the 2nd MT: Briefly press MFT (5) button and say the name of person you wish to call. CarKit repeats the name and starts dialing.
Last number redialing
For the 1st MT: Press twice VOL+ (2) button. From speaker you can hear a beep.
For the 2nd MT: Press twice MFT (5). From speaker you can hear a beep.
B: MuLtiPLe PAiRiNG / SWitchiNG BetWeeN the teLePhONeS:
i-tec SOLAR - Bluetooth MULTIPOINT Handsfree CarKit may be paired with up to 8 telephones equipped with the technology Bluetooth,
but it works with only 2 last paired MT (if the Multipoint function is ON). Pairing with additional (ninth and so on) telephone shall
automatically cancel the telephone(s) that were not used for the longest time. Therefore, Handsfree CarKit shall retain in the memory up
to 8 telephones.
Between paired telephones, it is simple to switch using the following methods:
1. Disconnecting the actually used telephone, using the item “Active equipment” in the Bluetooth menu of the telephone.
2. Connecting the desired telephone, using the item “Paired equipment” in the Bluetooth menu of the telephone, by command
“CONNECT”.
