- 12 -
OPERATION
Read and understand the Safety Instructions section of this manual before operating the i-mop.
Filling the Solution Tank
Always fill the i-mop tank with clean water maximum 4L (1 gallon) from a tap or hose. To prevent
dirt from entering the Solution Tank, use only non-foaming detergent.
Recovery Tank
Make sure the fluid level of the Recovery Tank does not exceed 6L (1.5 gallon) to prevent
damage to the i-mop.
Note:
Every time the Solution Tank is refilled, the Recovery Tank should also be emptied.
Setting the i-mop in the “Operating Position”
Crouch down and while holding the scrub deck with one hand, push the handle forward with the
other hand. Bring the scrub deck slowly down to the floor.
ATTENTION
: If the i-mop is in operating position, you will always need to hold it with at least one
hand as the i-mop is not designed to stand without support.
Never use your foot to lower the scrub deck to the floor.
