21
6
Operation
6.1
Before you start
1.
Check the i-vac 9B® for damage or defects.
2.
Check that the dust bag is placed in the i-vac 9B. See also section 5.3.
3.
Make sure you have the correct tool for the intended purpose. See also Figure 2.
4.
Check the brush from the tool for wear and tear.
5.
Check all filters. See section 7.2.
6.1.1
Height adjustment
Pull the knob (Figure 15, pos 1) on the wand up
to unlock it, adjust the length of the wand and
release knob to lock it.
Figure 15
