22
6.1.2
Insert and check the batteries
1.
Align each battery with the slot (Figure 16,
pos 1) and slide each battery in until you hear
a "click". The batteries are now fixated.
2.
Press the ON/OFF switch (Figure 17, pos 1) to
turn on the i-vac 9B®. The green light in the
ON/OFF switch will go on.
3.
Check the battery power status display below
the ON/OFF switch (Figure 17, pos 2). See
section 2.1.
4.
Press the ON/OFF switch (Figure 17, pos 1) to
turn off the i-vac 9B.
Figure 16
Figure 17
TIP:
It is not recommended to use the batteries when charged less than 40%. The i-vac 9B can
operate on a single battery.