16
5.3
Replacing the dust bag
Unplug the main power cable before replacing the dust bag.
Only use original i-team dust bags.
Make sure that the hose is removed from the i-vac 6
®
before removing the dust bag
. This
may cause damage to the dust bag and is potentially bad for your health as a result of dust.
1.
Turn off the i vac® 6 with the main power
switch (fig 9, pos 1).
2.
Release the latch (fig 9, pos 3).
3.
Lift the head (fig 9, pos 2) under the grey
rim, on the side of the latch.
Figure 9
4.
Pull the head (fig 10, pos 1) towards the
side of the hose entrance and lift it up.
Figure 10
