i-SENS NoCoding1 Plus, Руководство владельца

Страница: 23 / 29

42 www.i-sens.com www.i-sens.com 43
Step 2 Turning the PP2 alarm OFF
To turn off the PP2 alarm, press
and hold the
▲
button for 3
seconds. ‘PP2’ , the bell ( )
symbol and ‘OFF’ will appear
on the screen. Then the screen
will change automatically to the
memory check mode without
the bell ( ) symbol being
displayed.
Step 1 Turning the PP2 alarm On
Without inserting a test strip,
press and hold the
▲
button for
3 seconds to set the post-meal
alarm. 'PP2’ , bell ( ) symbol and
‘On’ will be displayed. The screen
will then automatically change
to the memory check mode.
At this time, bell ( ) symbol,
indicating that the PP2 alarm has
been set, will be displayed on
the screen.
Step 2
Use the
▼
button to scroll
through the test results,
starting from the most
recent and ending with the
oldest.
Press the
▲
button to
return to the result seen
previously.
After checking the stored
Step 1
Press any button to turn the meter on. The current
date and time will be displayed on the bottom of
the screen followed by the 1 day average value
and the number of the test results saved within the
current day.
Viewing Test Results Stored in the Memory
The number of tests
within the current day
▲
button
Setting the Alarm Function
Four types of alarms can be set in the NoCoding1 Plus Meter:
one post-meal alarm (PP2 alarm) and three time set alarms
(alarm1-3). The PP2 alarm goes off 2 hours after setting the
alarm. The alarms ring for 15 seconds and can be silenced by
pressing any button or by inserting a test strip.
disappears
Setting the Post-meal Alarm (PP2 alarm)
▼
button
test results, hold the
●
button to turn off the meter.
Note: The control solution test results saved with the
symbol will be displayed with the symbol when you review
the stored test results.