i-SENS KetoSens, Руководство пользователя

Страница: 8 / 50

8 www.i-sens.com www.i-sens.com 9
The KetoSens meter uses two 3.0 V lithium batteries.
Before using the meter, check the battery compartment and
insert batteries if empty.
When the
symbol appears on the display while the meter is in
use, the batteries should be replaced as soon as possible. The test
results may not be saved if the batteries run out.
Inserting or Replacing the Batteries
Step 1
Make sure the meter is turned off. Push the
cover in the direction of the arrow to open
the battery compartment.
Step 2
Remove the used batteries one at a time.
Slip your index finger under the battery to
lift and pull out as shown. Insert two new
batteries with the + side facing upwards and
make sure the batteries are inserted firmly.
Step 3
Place the cover on the battery compartment.
Push down until you hear the tab click into
place.
Note: Removing the meter batteries will not affect your stored
results. However, you may need to reset your meter settings.
See page 14.