i.safe MOBILE IS360.2, Быстрый старт

Страница: 6 / 88

6
Place the battery in the battery compartment.
Check that the battery is seated correctly and securely.
Reinstall the battery compartment cover and hand-tighten the screws using the Screwdriver
provided.
SWITCHING ON
Press and hold the on/off key for about 3 seconds.
When turning on the device for the first time, follow the instructions on the screen.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN appears after
switching on.
If you have inserted two SIM cards, select a favorite card. Information on operating the
device can be found at
www.isafe-mobile.com/en/support/service
under the menu item
“ FAQ “.
CHARGING
Only charge the device outside of explosion hazardous areas.
Do not charge the device in the vicinity of flammable substances.
Only charge the device using the Type C USB Cable supplied.
Only charge the device at ambient temperatures b5 °C to +35 °C (+41 °F to +95 °F).
Charge the device under dry indoor conditions only.
Do not charge the device in environments dusty or humid.
Connect the adapter suitable for your country to the power supply unit.
Connect the Type C USB Cable to the power supply unit.
Connect the Type C USB Cable to the USB interface of the device.
CONNECTING APPROVED ACCESSORIES
Only connect accessories approved by i.safe MOBILE to the device. Accessories approved by
i.safe MOBILE can be found at www.isafe-mobile.com/en/products .
Only use USB interface outside of explosion hazardous areas.
Under no circumstances should you open the cover of the USB interface in explosion hazar-
dous areas.
Approved accessories can be connected to the USB interface.
The USB interface is used for charging and data transfer.
Connect approved accessories or other devices to the USB interface only by using the
Type C USB Cable.
MAINTENANCE/REPAIR
Contact the
i.safe MOBILE
repair service at
www.isafe-mobile.com/en/support/service
if
the device is not working normally, if the device needs to be repaired or if a replacement part
is required.