8
4
USB PORT: HID (Human Interface Device) and to charge the battery.
Do not open the USB port in hazardous areas!
POWERING ON AND OFF THE IS-MP.1
To powering ON the device, press the
[On/Off Key]
.
The screen lights up and the device is in running order.
For powering Off the device, press the
[On/Off Key]
.
The display indicates a 3 second countdown and turn off .
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on
[Key 1]
.
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “
NO TAG
” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the IS-MP.1 ON
[On/Off Key]
. Press
[Key 2]
for turn On and Off the Bluetooth
function. For pairing with other devices push and hold
[Key 2]
. The Display will
indicate “
Pairing Bluetooth …
” and after successful pairing the IS-MP.1 will be listed
as
RNBT-E5D5
in paired Bluetooth device.
The display of the IS-MP.1 will indicate “
End of pairing
”. For existing connection
the display of the IS-MP.1 indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “
WINDOWS
TIDMULTIPEN V.1.x
” on PC. For Android device install the application
“
TECTUS MultiPen
” available on Google Play™ Store.
8
4
USB PORT: HID (Human Interface Device) and to charge the battery.
Do not open the USB port in hazardous areas!
POWERING ON AND OFF THE IS-MP.1
To powering ON the device, press the
[On/Off Key]
.
The screen lights up and the device is in running order.
For powering Off the device, press the
[On/Off Key]
.
The display indicates a 3 second countdown and turn off .
READ OF TRANSPONDERS
Hold the top of the device near to a transponder and make a short press on
[Key 1]
.
If the transponder can be read, the display will indicate the transponder type and
the UID and the device gives a short vibrate.
If there is no transponder in reading area, the display will indicate “
NO TAG
” vibrate
in a longer sequence.
The multipen will indicate automatically supported transponders as follows:
LF 125/134 kHz: EM 41xx, EM 42xx, HTS, FDX-B, HDX
HF 13,56 MHz: ISO 15693, ISO 14443, NFC
UHF 860 MHz … 960 MHz
BLUETOOTH CONNECTION
Turn the IS-MP.1 ON
[On/Off Key]
. Press
[Key 2]
for turn On and Off the Bluetooth
function. For pairing with other devices push and hold
[Key 2]
. The Display will
indicate “
Pairing Bluetooth …
” and after successful pairing the IS-MP.1 will be listed
as
RNBT-E5D5
in paired Bluetooth device.
The display of the IS-MP.1 will indicate “
End of pairing
”. For existing connection
the display of the IS-MP.1 indicate a BT icon top right. For lost connection the BT icon
will be framed.
READ TRANSPONDERS ON PC OR ANDROID™ DEVICE
For reading the transponders via Bluetooth you have to install “
WINDOWS
TIDMULTIPEN V.1.x
” on PC. For Android device install the application
“
TECTUS MultiPen
” available on Google Play™ Store.