Safety Instructions
6
3
Faults and Damages
If there is any reason to suspect that the safety of the phone has been
compromised, it must be withdrawn from use and removed from any
ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the
phone.
The safety of the phone may be compromised, if, for example:
malfunctions occur.
the housing of the phone or the battery shows damage.
the phone has been subjected to excessive loads.
the phone has been stored improperly.
markings or labels on the phone are illegible.
It is recommended that a phone which shows or which is suspected of
faults and damages is returned to the manufacturer for inspection.
4
Ex-relevant Safety Regulations
Use of this phone assumes that the operator observes the conventional
safety regulations and has read and understood manual, safety instruc-
tions and certificate.
The following safety regulations must also be complied with:
The housing of the phone must not be opened inside ex-hazardous
areas. This also relates to the battery compartment.
The battery may only be exchanged or charged outside ex-hazardous
areas.
Use only the appropriate battery type BPE01A or BPE01B.
It is not allowed to carry spare batteries into Ex-hazardous areas.
The battery may only be charged outside the Ex-hazardous area using
the appropriate charger or other equipment approved by i.safe
MOBILE GmbH.
The battery may be charged only at temperatures in between
0°C..40°C.
The phone must not be exposed to abrasive acids or bases.
The phone must not be taken into zones 0, 1, 20, 21 or 22.
Only accessories approved by i.safe MOBILE GmbH may be used.
