Quick Start
13
8
First Steps
8.1
Battery
The battery is inserted into the back of the mobile phone. The
battery is not fully charged when the mobile phone is pur-
chased, but it contains enough energy to power on the
phone. To obtain best battery performance and battery life,
let the battery discharge completely before charging it com-
pletely for the first three charging cycles.
8.1.1
Installing and Extracting the Battery
When installing the battery, insert the teeth at the top of the
battery into the corresponding notches of the mobile phone,
then press the battery down and secure it by turning the two
screws with the delivered screw driver (TORX T8). Ensure that
the battery is safely in place before powering on the phone.
8.1.2
Charging the Battery
Connect the i.safe
PROTECTOR
USB-cable with the phone as
indicated in the picture below: