i-PRO WV-X86531-Z2-1, Веб-руководство

Страница: 8 / 75

・The factory shipping position is [M].
・Depending on the improvement of the product, the appearance may differ from the
actual product to the extent that it does not affect the product operation.
After adjusting the angle with the TILT adjusting lever, change the [Tilt adjustment
lever position] on the camera-side screen to apply the adjusted angle to the PTZ.
Positioning accuracy may be affected by clicking or centering movement.
2.4 Use the TILT adjusting lever to determine the shooting
range
The TILT adjusting lever allows you to change the TILT angle of all multi part cameras
simultaneously.
When operating the TILT adjustment lever, slide it to the right and left with the lever pinched and
raised slightly. The multi part cameras move in the TILT direction. For the TILT adjustment
lever, refer to the following.
→ TILT adjusting lever
2.4.1 Change the TILT adjustment angle
The TILT adjustment lever can change the angle of the multi part cameras to the following three
levels. The angle of tilt of the camera relative to ceiling and horizontal conditions is shown.
Refer to the installation video for the TILT adjustment lever operation.
→ Set up
・ [N](Near):47°
・ [M](Middle):40°
・ [F](Far):33°
(1) Slide the TILT adjustment lever to the right and left by lifting the lever with your finger.
・ Slide to the right to adjust to the angle of [N]. Use to shoot near areas.
・ Slide to the left to adjust to the angle of [F]. Use to shoot far areas.
2. Set up
2.4 Use the TILT adjusting lever to determine the shooting range
3