[Audio detection alarm]
•
On:
Uses audio detection alarms. All of the detection targets for AI sound classification will be selected.
•
Off:
Does not use audio detection alarms.
•
Default:
Off
[Alarm deactivation time]
Set the duration for which detection is not to be performed after an alarm has been detected. For example, by
using this function you can prevent mail from being sent too often when the E-mail notifications are configured
to be sent to a mobile terminal or tablet device when an alarm is detected.
5 – 600 seconds
•
Default:
5s
Note
•
The duration of the alarm deactivation time can be specified for each type of alarm. For example,
the audio detection alarm is detected even during the alarm deactivation time of the VMD alarm.
[Next] button
If you click the [Next] button, the alarm function type setup menu will be displayed. (
®
the alarm function type (Alarm function type setup menu)”)
Note
•
If you click the [Next] button, the setting items in the screen are saved.
[Back] button
If you click the [Back] button, the event function type setup menu will be displayed. (
®
schedule/alarm (event function type setup menu)”)
3.4.2.3 Alarm: Configure the alarm function type (Alarm function type
setup menu)
Here, select an alarm type from “SFTP Transfer” or “SD memory recording”.
[Trigger]
•
SFTP Transfer:
When an alarm occurs, transmits a JPEG image by SFTP.
•
SD memory recording:
When an alarm occurs, records the image to the SD memory card.
Note
•
Alarm-triggered “SFTP Transfer” and “SFTP periodic image transmission” can both be set at the same
time.
•
If alarm-triggerd “SFTP Transfer” and “SFTP periodic image transmission” are both set, alarm-triggerd
“SFTP Transfer” is prioritized.
[Recording format]
Select the recording format by selecting from “JPEG(1)”, “JPEG(2)”, “Stream(1)”, “Stream(2)”, “Stream(3)” and
“Stream(4)”.
Operating Instructions
53
3 Detailed Settings
