4
Standard accessories
*1 This label may be required for network management. Use caution not to lose this label.
Camera mount bracket ×1
Fixing screw ×2 (M3×8 mm {5/16 inches})
(of them, 1 for spare)
*2
Power cord plug ×1
*2
Cable for easy kitting ×1
Decorative cover
(upper part and lower part) ×1
*2 The cable for easy kitting and the power cord plug are attached to the camera.
Do not use the cable for easy kitting after kitting work.
Other items that are needed (not included)
• Fixing screw
Installation method
Recommended
screw*
1
Minimum pull-out
strength*
2
Directly mount the camera onto the installation surface.
M4 × 16 mm
{5/8 inches} × 4 pcs.*
3
196 N {44 lbf}
Mount the camera using the exclusively designed mount bracket.
Refer to the operating instructions of each
bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this case,
wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the mini-
mum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust ceiling or wall with a thickness of
20 mm {25/32 inches} or more.
• Ethernet cable with RJ45 plug (category 5e or better, straight, 4 pairs (8 pins))
• Tools
Note:
Size information of usable plugs and cables
⇒
Step3
Installation Guide (this document) ...................... 1 pc.
IMPORTANT SAFETY INSTRUCTIONS .............. 1 pc.
Code label*
1
....................................................... 1 pc.
Specifications*
*
For further information, refer to the “Basic Information”.
Power source*
1
:
12 V DC
PoE (IEEE802.3af compliant)
Power consumption*
1
:
12 V DC:
970 mA/Approx. 11.6 W
PoE 48 V DC: 270 mA/Approx. 12.95 W (Class 0 device)
Operating environment:
Ambient operating temperature:
Ambient operating humidity:
–10 °C to +50 °C {14 °F to 122 °F}
(Power on range 0 °C to 50 °C {32 °F to 122 °F})
10 % to 90 % (no condensation)
Storage environment:
Storage temperature:
Storage humidity:
–30 °C to +60 °C {–22 °F to +144 °F}
10 % to 95 % (no condensation)
EXT I/O terminal:
ALARM IN1
(Alarm input 1/ Black & white input/ Auto time adjustment input) (x1)
ALARM IN2 (Alarm input 2/ALARM OUT) (x1)
ALARM IN3 (Alarm input 3/AUX OUT) (x1)
Audio input:
For microphone input:
For line input:
ø3.5 mm stereo mini jack
Recommended applicable microphone: Plug-in power type
(Sensitivity of microphone: –51 dB to –38 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance: Approx. 2 kΩ (unbalanced)
Supply voltage: 2.5 V ±0.5 V
Input level: Approx. –10 dBV
Audio output*
2
:
ø3.5 mm stereo mini jack (Audio output is monaural.)
Output impedance: Approx. 600 Ω (unbalanced)
Output level:
–20 dBV
Dimensions:
Maximum diameter: ø185 mm × 214 mm (H)
{ø7-9/32 inches × 8-7/16 inches (H)}
Mass:
Approx. 1.8 k
g
{3.97 lbs}
Finish:
Camera portion:
Aluminum die cast, i-PRO white / ABS resin, Black
Decorative cover:
ABS resin, i-PRO white
*1 Refer to our technical information website <Control No.: C0106> for further information about Power source
and Power consumption information.
*2 The audio output can be switched to the monitor output. Refer to the “Operating Instructions” on our manual
website for descriptions of how to switch the output.
Optional accessories
Wall mount bracket:
WV-QWL100
Ceiling mount bracket (ANSI): WV-QCL101-W
Wall mount bracket:
WV-QWL500-W
Ceiling mount bracket:
WV-Q105A
Ceiling mount bracket:
WV-QEM101
Dome cover:
WV-QDC100
Ceiling mount bracket (ISO):
WV-QCL100-W
The latest information
→
Technical information website “Accessory Selector” <Control No.: C0501>
