12
D
SD (MOUNT) indicator
• When a microSD memory card is inserted and could
be recognized
Lights off
→
Blinks green
→
Lights off
• When data can be saved after the microSD memory
card is inserted and the SD ON/OFF button is pressed
(less than 1 second)
Lights off
→
Lights green
• When data can be saved to the microSD memory card
Lights green
• When the microSD memory card is removed after
holding down the SD ON/OFF button
(about 2 seconds)
Lights green
→
Blinks green
→
Lights off (recording)
Lights green
→
Lights off
(waiting for recording)
• When data cannot be saved to the microSD memory card
because an abnormality was detected or the microSD
memory card is configured not to be used
Lights off
Note:
• Lighting/blinking LED can be turned off with the software settings at any time. (The initial state
is lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation
conditions. ( Operating instructions on our support website)
E
SD memory card warning/error indicator
• When a warning status is detected
Lights red
* SD memory card warning detection conditions: After the total use time has exceeded 6 years
and the number of overwrite times has exceeded 2000.
• When an error status is detected
Blinks red
*SD memory card error detection conditions: Write error, read error, etc.
Note:
• The default is off. According to the installation environment, set up with software as required.
( Operating instructions on our support website)
F
SD ON/OFF button
(1) When the SD ON/OFF button is pressed (less than 1 second), the SD (MOUNT) indicator
lights up in green and data can be saved to the microSD memory card.
(2) When the SD ON/OFF button is held down (about 2 seconds), the SD (MOUNT) indicator
lights off and the microSD memory card can be removed.
G
TELE button
Click the TELE button to adjust the zoom ratio to the “Tele” side.
H
WIDE button
Click the WIDE button to adjust the zoom ratio to the “Wide” side.
