I-Panda 40A Series, Руководство пользователя

Страница: 17 / 22

17
7.5 The controller has been pre-programmed to properly charge 4 battery types. See
chart below. Any other types may be programmed using included software.
Pre-Programmed Charging Specs
Battery Type
Bulk Voltage Floating Voltage
12V 24V 48V 12V 24V 48V
Vented
14.2V 28.6V 57.2V 13.2V 26.4V 52.80V
Sealed
14.2V 28.6V 57.2V 13.4V 26.8V 53.60V
Gel
14.2V 28.6V 57.2V 13.7V 27.40V 54.80V
NiCd
14.2V 28.6V 57.2V 14.0V 28.0V 56.0V
Other
user-defined (using included software)
Battery Type is defaulted to Gel. To change use the keypad on the display
8. Technical Parameters
Model:I-P-SMART1-DC12V/24V/48V-se
ries
40A 50A 60A
Charge Mode Maximum Power Point Tracking
Method 3 stages: fast charge(MPPT),constant voltage, floating charge
System Type DC12V/24V/48V Automatic recognition
System Voltage
12V system DC9V~DC15V
24V system DC18V~DC30V
48Vsystem DC36V~DC60V
Soft Start Time
12V/24V/48Vsyste
m
≤10S
Dynamic Response
Recovery Time
12V/24V/48Vsyste
m
500us
Conversion
Efficiency
12V/24V/48Vsyste
m
≥96.5%,≤99%
PV Modules
Utilization Rate
12V/24V/48Vsyste
m
≥99%
Input Characteristics
MPPT Working
Voltage and Range
12V system DC18V~DC150V
24V system DC34~DC150V
48V system DC65~DC150V
Low Voltage Input
Protection Point
12V system DC16V
24V system DC30V