15
14
In the Box
Your Smartphone packing box includes the following items:
• i.onik® i545 Smartphone
• Earphone
• Charger
• USB data cable
• User manual
• Battery
Battery Charging
1. Before using your Smartphone, please charge up the
battery. Use the USB adaptor provided in the box to charge
up your Smartphone battery. This Smartphone has a
built-in lithium ion battery.
2. The first charging cycle may be long. Please charge in the
following conditions:
a. The battery icons shows have no power.
b. The system automatically shuts down or shuts down just
after starting up.
c. The Smartphone does not respond to any of its buttons.
Remarks
1. In case the device is not used for long periods, charge the
battery at least once a month to avoid damage to your
battery.
2. After a low battery shut down, allow the device to charge for
sufficient time before using it again.
3. Device charging should done when the Smartphone is in standby
mode. Charging the device while in use may take longer.
Installing the SIM
An SIM card carries useful information, including your mobile
phone number, PIN (Personal Identification Number), PIN2,
PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (In-
ternational Mobile Subscriber Identity), network information,
contacts data, and short messages data. Insert SIM as shown
below.
Note:
After powering off your mobile phone, wait for a few second
before removing or inserting an SIM card. Exercise caution when
operating an SIM card, as friction or bending will damage the SIM card.
Keep SIM cards beyond the reach of small children.
32 User Guide
Mobile Subscriber Identity), network information, contacts data,
and short messages data.
GSM /
WCDMA
GSM
Note:
After powering off your mobile phone, wait for a few seconds before
removing or inserting an SIM card.
Exercise caution when operating an SIM card, as friction or bending
will damage the SIM card.
Properly keep the mobile phone and its fittings such as the SIM cards
beyond children's reach.
5.2 Phone
Touch the Contacts icon on the Home screen or in main menu
interface. Three tabs are listed at the
top of the screen. Select the phone tab and you can find a dialpad
screen where you can input phone number to originate a call.
Note :
During a conversation, you can’t originate a new call by open
the dialpad, enter number and press dial key. If you press dial key, the
current conversation would hold.
