I-O Wireless WBC11, Руководство пользователя

Страница: 20 / 55

20
Figure 2.7. The led indicators
The LED indicators (figure 2.7) display the status of the bridge. The power LED,
on the right, displays the power status. Green means a correct power feed, red
indicates wrong firmware or power failure.
The LED in the middle displays the network status. If the bridge is connected to
a network it will light-up green, otherwise it will be red or off.
The left-hand side LED displays the radio link status. The client bridge unit
function of this LED differs from the server bridge unit.
The radio link LED of the
server will blink as soon as it is transmitting a beacon, approximately 10
times per second, even if there is no connection to the client.
The client will
blink as soon as it receives a beacon. It is this function that is used for the first
alignment.
First, install the server side of the bridge. Aim the server antenna (unless it is an
omni antenna) towards the client side of the bridge. Then power up the server
side.
Secondly, the client side needs to be installed. Aim the client antenna towards
the server side and power-up the client unit. This should result in a blinking radio
link LED at the client side. Please remember the server radio link LED will always
blink, while the client LED blinks only when it receives a beacon. If the client
radio link LED is not blinking, realign the antennas (both server and client side).