4
•
Slide the T-Flash card into the slot.
•
Attach the battery.
•
Push the battery cover until it clicks into place.
Charging the Battery
The phone prompts a warning tone and message stating
insufficient battery when the power of your phone is low. Please
follow the instructions mentioned below to charge your phone:
•
Plug the connector of the charger into the jack of the
phone.
•
Plug the charger into a standard AC wall outlet.
Note:
When
is shown on the screen, it indicates that there is not
enough power and you should now charge your phone. When
charging is complete, the battery icon will stop flashing.
Charging…….
Fully
Charged……
You must fully charge the battery before using the phone for the first time.
It is recommended to charge the battery for four hours before using the
phone for the first time.
If the phone is turned on during charging, you can still make or
answer calls, but this will consume battery power, thus will extend
the charging time of the phone.
5
Switch On/Off the Phone
To turn on/off the phone, press and hold the Power Key. If you have
enabled the SIM Lock function then enter the PIN code (the 4 to 8
digits secret code of your SIM card). It is preconfigured and
provided to you by your network operator or retailer. If you enter an
incorrect PIN code 3 times in succession, your SIM card will be
locked. To unlock it, you must obtain a code from your network
operator.
Automatic Customer Registration
After 4 hours of usage a SMS from the phone will be sent
automatically for the customer registration.
Note: standard SMS charges apply.
