Memory Function
Storing data
After each measurement, the systolic and diastolic pressure, heart
rate with the time and date will be automatically stored.
The monitor features a 3 user memory capability. Each user holds
the last 30 measurements, replacing the oldest data with new one.
Recalling data
A. Press SET button to select User 1, 2 or 3.
B.
Press MEMORY button to enter Memory Mode.
The first reading will be the average of all measurements.
C. Press MEMORY button again. The latest measurement will appear
with the recording date and time.
D. Press MEMORY button to read the following measurements in
sequence.
E. To stop reading the memories, press START/STOP button to switch
to Standby Mode.
Erasing data
A. Press SET button to select User 1, 2 or 3.
B.
Press the MEMORY button to enter Memory Mode.
C.
Press and hold MODE and SET buttons at the
same time, and the data for the selected user will
be erased automatically.
D.
To confirm the data in the selected user has been
erased, press MEMORY button and no data should
appear.
Note: Once deleted, your data can NOT be restored.
16
