I+ME ACTIA BOP HD8, Руководство пользователя

Страница: 33 / 87

User Manual
BOP HD8 / BOP HD16
Ref.: IR1212828 A 21.08.2009 Edition 1.0 Page 33/87
I + M E A C T I A G m b H
4.1
E
XTERNAL ACCESS
4.1.1. V
IDEO
S
TREAMING
By using the RTSP protocol an external access to the video channels is possible (password
protected). The selection of the video cannels is made via TCP/IP. In principle each active
recording channel could be transferred. The quality of the transferred data equates to the
settings for data recording.
The video channels are dedicated to the ports 85xx in ascending sequence.
ƒ
Port 8501 video stream channel 01
ƒ
…
ƒ
Port 8516 video stream channel 16
The video player must access to the port via the RTSP protocol.
Example:
rtsp://xxx.xxx.xxx.xxx:8501/bop4
(whereas xxx.xxx.xxx.xxx is the TCP/IP address of the BOP HD)
Additional settings are necessary to transfer not active recording video channels or
the output signal of the video processor. Please ask your specialist dealer or I+ME
ACTIA for further information.
4.1.2. A
LARM OVER
E
THERNET
The BOP HD can receive an external alarm by LAN (broadcast) and thereupon the BOP HD
himself can switch into alarm mode. The external alarm can be dispatched from another
BOP HD or any PC. By this way it is possible that all BOP HD inside a network are starting
with the recording of alarm data at the same time.
Only if it is set in the configuration the BOP HD responds to the external alarm.
See chapter 6.4.10.6.