1.6 Danger area
Danger area refers to the area where the lift table or its lifting device (such as fork or attachment) is working or
lifting, which brings potential dangerous factors to persons or the area for load transportation. Generally, the range
of danger area extends to the point of load lowering or truck attachment lowering.
Unauthorized persons must be kept away from danger area.
1.7 Working in hazardous environments
A self-propelled electric lift table operating in an area where there is a risk, or in any other high-risk area, should be
specially equipped for the purpose.
1.8 Safety devices and warning signs
Enough importance should be attached to safety devices, warning signs and warning notices introduced above in
Instructions Manual.
1.9 Driving in public areas
The electric lift table should not be driven on public roads outside a specific area.
1.10 Distance between vehicles
Remember that the lift table in front of you may brake suddenly therefore keep a reasonable distance.
1.11 Operation management
Driving speed must be applicable for local conditions. Low speed is requested for curve driving, narrow aisle
passing, swing door passing or driving in blocked field. The operator must be capable to measure the braking
distance to front area by sight and control the lift table continuously. Sudden brake (except in emergency), quick
U-turn and overtaking in a blocked field are prohibited.
1.12 Visibility
The operator must focus on the driving direction to ensure clear sight for the road conditions ahead. In case the
carried cargo interrupts the sight, reverse driving is requested. If it doesn’t help in this way, there must be
another person walking ahead of lift table to give guidance and warning.
1.13 Passing a slope
The permitted slope in a narrow aisle for lift table passing must be clean and anti-slip. Driving on slops stipulated
in technical specifications (instructions manual) is permitted. The carried cargo must face to upward direction of
slope. U-turning or parking this lift table on a slope is prohibited. On passing a slope, driving is requested at low
speed. At the same time, the operator must be always prepared to brake and stop.
1.14 Floor Load
It is advisable to carefully check notices and directions about the maximum floor load or maximum wheel pressure
to ensure that this is not exceeded.
1.15Transports
