User’s Manual
12
FRONT PANEL CONTROL
•
Power
Button:
Press this button to switch ON/OFF monitor’s power.
•
Power Indicator:
Green —
Power
On
mode.
Orange — Power Saving mode.
•
MENU / ENTER:
1. Activates the OSD menu or confirms adjustments to settings.
2. Exit OSD volume display when in volume OSD status.
•
Volume
◄
►
:
1. Activates the volume control when the OSD is OFF.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
•
Auto Adjust button: (for D-sub only)
When OSD menu is in off status, press and hold this button for more than two seconds to activate
the Auto Adjustment function.
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and Phase.)
NOTES:
•
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•
Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
•
Function Key Lock:
Press the
◄
「
Volume -
」
,
►
「
」
and the
「
Menu
」
buttons simultaneously to enable the
Function Key Lock. When the Function Key Lock is enabled, only the Power button is active.
Press the
◄
「
Volume -
」
,
►
「
」
and the
「
Menu
」
buttons simultaneously again to unlock
the function keys.
