a. Please be present through the calibrating process
b. Reset Lock: Long press 'Reset' button for 3 seconds,
restore to the factory default settings .
c. Calibrate the Door Open Direction:
When the voice prompt ' Di ', the " " button
is always bright , turn the KNOB from the vertical
position to the horizontal position until the lock voice prompt 'successful'.
Note: If calibration fails, the " " button will stay bright,
in the direction of rotation, turn the KNOB down hard 1-2 degrees.
d. Calibrate the Door Close Position: Close the door, and press ' 7 ' for 3 seconds,
automatically calibrate the door close position.
a. Please be present through the debugging process .
b. " " button: Short press , the bolt will stretch out ;
c. Using Fingerprint / Password to Unlock, the bolt will retract.
d. 'Switch' button: Short press, the bolt will stretch out or retract.
e. KNOB: Rotate , the bolt will stretch out or retract.
f. By using fingerprint/ password /'switch' button / KNOB to unlock , then close the door, the
latch will stretch out to lock automatically.
g. Verify if other functions include Self-lock , Anti-peeping password , 'Reset' button, APP are
functioning properly.
1. Short press' Reset' or press any key to wake up the screen and long press " "
2. Add administrator password (6-8 digits) ending with " ". (Enter the same password, 2 times)
3. The Lock will voice prompt 'Successful' , then we can continue to add the 2nd administrator.
4. Add administrators fingerprint(6 times), or password (6-8 digits) ending with " "
(Enter the same password, 2 times).
5. Finish setting Administrator, the lock will voice prompt 'The administrator is full, quit setting' .
Note: Make sure to press different parts of the same finger
until the whole finger is collected completely,
the lock key '1-6' will be lit when add successfully.
The improper operation will increase the input times.
Calibrating The Lock
Debugging
Using The Lock
Add Administrator
(The first 2 users are administrators)
If your still having trouble in any part of the process please feel free to contact us:
Phone: 1300 987 632 Email: [email protected] www.innihome.com.au
