i-gripper SiLA BOX, Техническое описание, Страница: 10 / 10

Standalone
Microdrop control without integration in local network
Important: Disable IPv6 at your PC / the control device
1. Power
on SiLA BOX WITHOUT USB to serial converter plugged
2. SiLA BOX opens up a hotspot starting with silabox _
3. Connect to the silabox_ hotspot with the password silamaster
4. Go to http://192.168.10.1 and download Unitelabs SiLA Browser
5. Select ‘Enable Hotspot’, click ‘save’ and power off the SiLA BOX
6. Plug-in all components, wait for ~60s
7. Connect again to the
silabox_ hotspot. AFTER the connection is
established, start sila_browser.exe OR run java – jar sila_browser.jar
8. Go to http://127.0.0.1:8080 and control your device
Problems? Unplug USB to serial will default device to Hotspot mode
or look at https://sila-standard.com/dipitems/silabox/
Developer? Download Java source from https://gitlab.com/SiLA
compile, and install new SiLA drivers over the webGUI
Integrated
Microdrop control integrated in your local network
Important: Disable IPv6 at your PC / the control device
1. Follow the steps of Standalone mode on the back until 3.
Uncheck ‘Enable Hotspot’ & configure Wi -Fi to your local network
2. Go to http://192.168.10.1 and download Unitelabs SiLA Browser
3.
Click ‘save’ and power off the SiLA Box
4. Plug-in all components, wait for ~60s
7. Connect to your local network.
AFTER the connection is
established, start sila_browser.exe OR run java – jar sila_browser.jar
8. Go to http://127.0.0.1:8080 and control your device
Problems? Unplug USB to serial will default device to Hotspot mode
or look at https://sila-standard.com/dipitems/silabox/
Developer? Download Java source from https://gitlab.com/SiLA
compile, and install new SiLA drivers over the webGUI
Super short manual how-to