I-Data ReRouter Скачать руководство пользователя

Страница: 59 / 79

Testing Connection to Remote Device
ida ReRouter

8. Testing Connection to Remote Device

When the

ida ReRouter

has been installed and is ready for operation you

are recommended to test the connection to the remote device being
communicated with. For a list of remote printer devices being supported
with the

ida ReRouter

, see chapter 1: "Introduction".

The remote devices to be operated with the

ida ReRouter

support the

Internet Control Message Protocol (ICMP) PING function

8.1 PING Function

The PING function is used for testing the connection to the remote
device. The PING function sends an echo request to the network host.
The function is useful for:

- Determining the status of the network and various host

connections.

- Tracking and isolating hardware and software problems.
- Testing, measuring and managing networks.

Before testing, make sure that the remote device is plugged in and
attached correctly to the LAN.

1. Activate the TCP/IP protocol

2. "PING" the unit from the workstation. This verifies both physical LAN

and IP network connectivity.

3. On the command line, enter the PING command and the IP address or

host name of the unit.

E.g.

PING 192.0.5.7

Содержание ReRouter
















































































Результаты поиска

Содержание ReRouter

Отзывы:

Похожие инструкции для ReRouter

Бренды по названию

Популярные бренды

I-Data ReRouter, Инструкция по установке и эксплуатации

Результаты поиска

Содержание ReRouter

Отзывы:

Похожие инструкции для ReRouter

Бренды по названию

Популярные бренды