Installation
I.D. Systems, Inc. One University Plaza, Hackensack, NJ 07601
000-0144-01
Tel: 201-996-9000; Fax 201-996-9144; email:
Page 25 of 41
Authorized User:
>OSHA<
After a successful login, the VAC screen will show
this message. If OSHA questions have not been
completed, >OSHA< will continually flash.
The operator should simply press the “CHECK”
button.
The first checklist question will then appear, with
multiple-choice responses.
Note: some vehicles are also configured with an
LED that will flash to remind operators and nearby
personnel that the checklist is unfilled.
OSHA vehicle checklist screens:
Question # / of total # of questions.
Text of question.
Available responses along bottom line of screen,
separated by
⎢
characters
(>> indicates more responses available by scrolling
with right arrow key).
Asterisked *selection* shows selected response.
Press right or left arrow keys to change *selection*
Press ENTER key to confirm current selection and
proceed to the next question.
Press ESC to go back one question.
When the last question has been answered, the
checklist has been completed successfully, and the
screen will indicate: - OSHA complete! –
If operator tries to exit checklist before it is
complete (by pressing the ESC key), the screen
will show this message. Exiting prior to
completion will not fulfill the OSHA requirement
and responses will be lost.
To exit the checklist, operator chooses *Yes* by
pressing ENTER.
To resume working on the checklist, press the right
arrow key to select *No* and then press ENTER.
3
2
1
